Support
Software download
FRA Data Display Software for FRA51602 / FRA51615
File Info |
FRA51602/FRA51615 Data Display Software Ver.1.0.3.0 |
Description |
This software supports the use of gain-phase anaylazer FRA51602/Frequency response
analyzer FRA51615 more conveniently.
The data measured by measuring instruments is imported to computers and displayed on
graphs via interfacing with USB, GPIB, RS-232 or LAN
Please refer to Instructional Manual.
/english/doc_portal/index.html
|
Applicapable Models |
Gain-Phase Analyzer FRA51602, Frequency Response Analayzer FRA51615 |
Key Features |
- 1. Obtain measured data interfacing with USB, GPIB, RS-232 or LAN.
- 2. Read data file saved in USB memory.
- 3. Save data in csv file, display and print in graph.
- 4. Remote control
- Basic parameters setting (Max. frequency sweep, Min. frequency sweep, AC
amplitude, DC bias)
Oscillator output ON/OFF
Sweep measurement, Comand Execution, Command log display
|
Operating Environment |
- OS: Windows 7 (32bit/64bit), Windows 8.1 (32bit/64bit), Windows 10
(32bit/64bit)
- CPU: 1 GBz or faster x86/x64 compatible processor
- RAM: 1GB or more
- Free Hard Drive Space: 500MB or more
- VISA: NI-VISA Ver15.0 or above
- .NET Framework Ver4.0 or above pre-installed
|
Installation Procedure |
- 1. Unzip downloaded file [FRA516xxDataDspl_1_0_3_0_Setup.zip].
- 2. Execute the installer [Setup.exe] in the unzipped folder.
- 3. Follow the instructions on the installer to complete the installation.
|
Software License Agreement |
By downloading this software, you accept and agree to be bound by the terms of the
software license agreement that appears below.
Please read this software license agreement carefully before downloading
-
License Grant and Right of Use:
NF Corporation (NF) grants you a limited, non-exclusive license to use the
software according to the applicable terms set forth below, subject to your
compliance with this agreement. NF reserves the copyright of the software.
-
Transfer to a Third-party:
If you transfer or redistribute this software to a third party, please
attach this "Software License Agreement" on your own responsibility.
The same terms and conditions applies when the software is redistributed in
magazines.
-
Restrictions:
May not modify the software; nor disassemble, decompile or othervise reverse
engineer the software.
May not use any part or all of the software for the purpose of developing a
new software.
On the other hand, when downloaded files contains the software has permitted
development rights as device driver and sample program, may use all or part
of software at the own software development.
-
Disclaimer of Warranty:
NF disclaim all warranties and conditions, express or implied for any
consequential damages caused by usage of software and attached documents. In
no event will NF be liable to correct or support any inaccuracy or
incompleteness of the software and attached documents.
-
High Risks Activities:
The software is not fault tolerant, and it is not suitable to use in any
hazadous environment that requires fail-safe function. The software is also
not suitable for any activities that may result in death, injury and
incidental damage (collectively, high risk activities). NF expressly
disclaims all warranties, either express or implied regarding applicability
to high risk activities.
|
Download of software |
FRA516xxDataDspl_1_0_3_0_Setup.zip [Approx.475KB]
Download
|