japanesechinese


NF Corporation
network contact us site map
Google  
home about nf products support news
Measurement Instruments Power Supply and Power Control produts Function Modules Customized Products
home > Products > Power Supply and Power Control Products > AC Power Source > DP series > Features
Product Information

AC Power Source
Programmable AC Power Source
DP series

Numerous functions for a wide range of AC power source usages

Sequence function

Parameters such as frequency, voltage and time can be programmed and sequentially output. Settings are made using the panel, remote controller (sold separately) or included control software. Long, complex output patterns can be easily programmed using this software.

space
*Number of steps: max. 255 (in 1 sequence)
sequence
space
*Setting items:
step time, output range, AC/DC mode, DC voltage, AC voltage, frequency, waveform, start phase, stop phase, phase angle, step termination, jump count, etc.
space
*Sequence control:
start, stop, hold, resume, branch 1, branch 2
space
*Number of memories: 5 (nonvolatile)
 
Example of output pattern
sequence

* AC line simulation *

Simulates a problem in the power supply line such as power failure, voltage rise, voltage drop, sudden phase changes, or sudden frequency change, thereby enabling all types of power supply fluctuation testing such as prototype evaluation and product inspection. Settings are made with the panel, remote controller (sold separately) or included control software.
space
*Number of steps: 6 (Initial, Normal 1, Transition 1, Abnormality, Transition 2, Normal 2)
ac line sim
space
*Setting items:
step time, output range, AC voltage, frequency, start phase, stop phase, trigger output, etc.
space
*Waveform: Sine wave
space
*Number of memories: 5 (nonvolatile)
Example of AC line simulation
ac line sim

* Clipped sine wave *

The peak clipped sine wave can be output.
Setting can be done using the crest factor (CF) or clip rate (percent of the peak value).

clipped sine wave
space
*CF setting range: 1.10 to 1.41 (with RMS correction)
space
*Clip rate setting range: 40.0% to 100.0%
space
*Number of memories: 3 (nonvolatile)

* Arbitrary waveform *

Arbitrary waveform output is possible. The arbitrary waveforms can be easily created using the included control software, and can be saved in the internal unit memory via an external interface or USB memory.
arb
space
*Amplitude resolusion: 16 bit
space
*Waveform length: 4096 words
space
*Number of memories: 16 (nonvolatile)
space

* Control software *

Enables control of basic parameters for output via a PC, including data logging, and creating/editing of sequence, simulation and arbitrary waveforms.

Basic controller
sequence
Basic controller
Sequence editing
space
space
AC line simulation
arb
Editing for simulation
Arbitrary waveform editing
space
space
logging
 
Logging of measured values
 


back
top of this page