japanesechinese


NF Corporation
network contact us site map
Google  
home about nf products support news
Measurement Instruments Power Supply and Power Control produts Function Modules Customized Products
home > Products > Measurement Instruments > Impedance/Gain-Phase Analyzer > ZGA5920 > Peripheral Equipment
Product Information

Impedance/Gain-Phase Analyzer
Impedance/Gain-Phase Analyzer
ZGA5920

mark Measurement adapters and peripherals
Measurement objet
Description
Model
Piezoelectric material
Dielectric material
Magnetic material
Inductor
Capacitor
Resistor
Transformer
Diode

Impedance Measuring Adapter
PA-001-0368
High Power Impedance Measurement Adapter (1 Ω)
PA-001-1840
High Power Impedance Measurement Adapter (100 Ω)
PA-001-1841
Test Fixture Adapter (1 Ω) *1
PA-001-1838
Test Fixture Adapter (100 Ω) *1
PA-001-1839
Servo Loop Gain Measuring Adapter
PA-001-0369
*1 Test fixtures/leads provided for LCR meters.

mark Peripherals/related products (sold separately)
Description
Model
Shunt Resistor
PA-001-0370
Signal Injector Probe
5055
High Power Impedance Measuring Adapter (1 Ω)
PA-001-1840
High Power Impedance Measuring Adapter (100 Ω)
PA-001-1841
High Withstand Voltage Alligator Clip Cable (small)
PA-001-0420
High Withstand Voltage Alligator Clip Cable (large)
PA-001-0421
High Withstand Voltage Alligator Clip Set (3 per set)
PA-001-0419
High Withstand Voltage BNC Cable
PC-002-3347 *2
High Withstand Voltage BNC Adapter (T-branch)
PC-001-4503 *2
Alligator Clip Cable Set (3 per set)
PC-001-0422
High Withstand Voltage BNC extension cable
PC-007-0364
Kelvin clip for the impedance measuring adapter (for replacement)
PC-007-1490
Loop gain measuring adapter clip cable (for replacement)
PC-007-1922
*2 The same one as provided with the main unit.



High Speed Bipolar Amplifier HSA series/BA series

hsa
HSA4051

line
Can measure in the actual operating range by driving the DUT (high voltage/current, etc.).
#DC to max. 50 MHz, max. 300 Vp-p, max. 4 Arms
#High slew rate
#Low output impedance
#Four-quadrant operation
#8 models
(choose from a range of frequency, output voltage and output current variations)

High power impedance measuring adapter
line
Combine with a bipolar amplifier to measure impedance at the actual operating voltage
  • Built-in shunt resistor:
    1 Ω (PA-001-1840) or 100 Ω (PA-001-1841)
  • Max. input voltage: 250 Vr ms
  • Max. input current: 1 Arms (1 Ω), 0.1 Arms (100 Ω)

Test fixture adapter High speed bipolar amplifier and high power impedance measuring adapter
line
Able to measure impedance in components of widely varying shapes.


back
top of this page