Primary parameters
Displays measured values for Lp, Ls, Cp, Cs, Rp, Rs, |Z|, |Y|, G.
Automatic selection is possible.
|
 |
Secondary parameters
Displays measured values for Q, D,  , X,
B, Rs, Rp, G, Lp, Rdc (DC resistance).
Automatic selection is possible.
|
|
Measurement frequency
Select one of the four frequencies (120 Hz, 1 kHz, 10 kHz, and 100 kHz) or input a numeric value (5-digit resolution). |
Equivalent circuits (Primary parameter)
For the L, C, and R, specify the equivalent circuit. Automatic selection is possible.
|
|
Measurement range
Automatic selection (AUTO) and manual selection (HOLD) can be switched.The default setting is automatic selection. |
|
Measurement speed
Switchable between 5 levels from 2 ms to 501 ms. |
